International Concepts Dresser

International Concepts Dresser
4.3 out of 5 stars
Save: $406.00 (54%) Pay $29.25/month for 12 months, interest-free upon approval for the Amazon Rewards Visa Card All Offers: » See more Promotions: » Details Compare products Customer reviews

Important things to consider before buying International Concepts Dresser

Features

Unfinished wood, easy to finish 6 drawers with euro glides Distance from floor to bottom of apron: 3.9" Inside drawer dimensions: 24.11"l X 12.84"w X 6.23"d Butcher Block Top

Learn more now »

Is this what you need when you buy International Concepts Dresser?

Description

57.3in. W x 16.5in. D x 32in. H.

Made from solid parawood each drawer with euroglides distance from floor to bottom of apron: 3.9 inside drawer dimensions: 24.11″w x 12.84″d x 6.23″d.

We want to give you some help that will enable you to achieve good results and pleasure in your finishing project. Your furniture is part of natures handwork. Every item has its own unique grain pattern and color. Dark grains and knots are a part of the character of wood and were put there years ago by the tree branches and the twisting of the wind, which causes trees to bend. All of which affects the outcome of every tree. Each piece of solid wood furniture is an original. Light and dark areas all blend during the finishing process. There are numerous products available for you to finish your furniture. Ask your local merchant to help you in product selection based on your particular needs.

Our desire is to assist you in achieving a beautifully finished piece of furniture. The following tips are to help you accomplish this goal.

First and most important is to read and follow the directions of your finishing material. The finish manufacturer really does know his own product, read finishing directions completely. Take your time to finish, remember don t rush it may take a little longer, but you will be proud of the results.

Surface preparation:

Although all pieces are sanded, they will need additional finish sanding. Check all surfaces for minor splits, chips or dents. Sand or fill with wood filler. Make sure the residue from the filler is sanded smooth. Start sanding with medium sand paper 120 and then finish with fine 220 sandpaper. Check all surfaces. If an item has any frizz or roughness, it will show when staining, and you may not be satisfied with the end result. Never skip the initial sanding of all parts. Wipe the furniture using a tack cloth available at paint hardware stores to remove all the dust created by sanding.

Staining:

Be sure stain is stirred thoroughly. Some stains have a heavy pigment on the bottom of the can. It is not uncommon to take up to five minutes to make sure the mud is dissolved. This keeps the stain color consistent from the top of can to the bottom. As you are staining, periodically stir the stain to keep it from settling to the bottom. We recommend doing a doodle area on the piece first in some inconspicuous location under a seat or table top . This will allow you to check stain color before proceeding. When you have completed your first coat of stain and have allowed it to dry, wipe a coat on clear finish on your doodle area. If you like the finished doodle and feel the color is fine. One coat is adequate if the stain is too light or uneven, a second coat of stain may be needed and a second test doodle using 2 stain coats is recommended.

Application:

You can almost use any type of rag, cotton works best, approximately 10 square. larger rags sometimes get in the way . Stain one surface at a time and do the harder areas first. There is no particular motion to applying the stain we recommend to do cross grain first and then with the grain.

As you stain each area, wipe excess stain off with the grain, then move to another area, as you finish go back over the entire piece with a clean rag to wipe up all excess stain.

Top coat:

The clear top coat may be wiped or brushed on. Wiping seems to prevent runs. Again, do small areas at a time. We recommend applying topcoat with the grain, however, you may find it necessary in some areas to apply gross grain, make sure the final wipe is immediately with the grain.

Allow the top coat to dry. The surface will appear gummy if not dry, drying time will vary depending on weather conditions, sand with very fine 220 or 600 wet/dry sandpaper, this removes the fuzz. Wipe with a tack cloth after sanding to remove debris. Feel the entire piece with your hands, if it still feels fuzzy, smooth out before applying additional coats. The fuzz will not go away and will remain until you take care of it, you are looking for consistent sheen. If after two coats you are happy with appearance you are done. If you have an uneven sheen, apply additional coats, always sanding lightly between coats. If water resistance is a goal, we recommend four layers of top coats, apply at least one coat of stain or clear finish to all surfaces of solid wood. Even if it is not seen, this prevents cracking as the piece continues to dry out over a period of years.

Remember to read finishing product instructions completely and take your time
This beautiful solid wood furniture from international concepts is a great additional to your home. Ready to finish in your own choice of color or leave as is. Makes a perfect addition to your home and complements any home d cor.

Buy now at Amazon.com »

Customer reviews

Kelly: "Solid" wood but not solid furniture

It's "solid" wood, meaning no MDF, but it's still made of small strips of wood bonded together and plywood. We've had it over a week, windows open half the days, and it still smells *very* strongly of glue, to the point of giving me headaches when I'm in the room with it.

See more 114 reviews on this product

Compare with similar items

Similar Item This Item Similar Item
Fusion 6-Drawer Double Dresser Pure Black International Concepts Dresser ACME Louis Philippe III Dresser
Price hidden $350.99 $357.46
Shop on Amazon Shop on Amazon Shop on Amazon

(114 ratings)

(269 ratings)

(88 ratings)

You May Also Like...